Quamar Nemo QE

On Demand Controls

• Simple touchscreen display: Very responsive and easy to understand. The display shuts off after 10 minutes of inactivity to save energy.
• Multiple dosing options: Single cup, double cup, & semi-automatic dosing. Easy to distinguish by their graphics and/or their color.
• Time-based grinding: The single & double cup dosing options can be programmed by 0.1-second increments from 0.1 to 64 seconds. The display shows the grinding time once you start grinding.
• Dosing count: The top number shows your current dosing count which can be reset. The bottom number shows the lifetime count which cannot be reset.

Grinding Burrs

• Flat burrs: Large size at 54 mm. The larger the size, the more of a grinding surface, resulting in faster production.
• High RPM: Fast spinning rate at 1400 rpm. The higher the speed, the faster the production, which can increase efficiency and reduce wait times.

Grinding Adjustment

• Micro-stepped adjustments: Multiple steps between each number. Easier to go back and forth between different settings from espresso to other coffee methods. The tab on the left side keeps the adjustment dial locked on its current position.
• Adjustment dial: Clockwise for a coarser adjustment. Counterclockwise for a finer adjustment. A flathead screw helps prevent you from adjusting too fine to where the burrs touch.
• Changing the fineness should always be done while the grinder is grinding

Portafilter Fork

• Ease of use: You can rest your portafilter while grinding for a complete hands-free operation. Accommodates most portafilters. The clearance from the fork to the coffee chute is approximately 3″.
• Adjustable, removable: You can remove the fork to grind into a container. There is a Flathead screw that holds the fork in place. The clearance underneath the funnel is approximately 4.5″.
• Dosing cup:  The Quamar Nemo QE has a small dosing cup you can grind into. It sits comfortably on the fork.

Bean Hopper

• Low profile: The Quamar Nemo QE comes with a short hopper to make it easier to fit underneath kitchen cabinets. The total height of the grinder without the hopper is ~10″. The bean hopper adds another 4.25″ bringing the total height to approximately 14.25″. The total capacity is ~250 grams of whole coffee beans.
• Set screw: Secures the hopper to the grinder. Serves as a reminder for users from quickly removing the hopper if it is full of beans.
• Fingerguard: Prevents users from “accidentally” putting their fingers in the grinding burrs.
• Stopper: A door near the bottom of the hopper can be pushed in to close the opening. This allows you to remove the hopper with beans inside so you can easily change the beans. There will be some beans already passed in the burrs which will have to be ground out first before removing the hopper.