main product photo

Jura Dual Frother Plus Steam Wand

Out of stock
Product ID
65057
Print this page
Our Price $34.99
  • Out of Stock
  • 30-Day Satisfaction Guarantee
  • Lowest Price Guarantee
  • FREE Shipping Mainland US over $75 1st in Coffee offers free standard ground shipping in the lower 48 contiguous United States on all electric espresso machine and coffee maker orders. In addition, all orders in the contiguous 48 United States over $75, receive free shipping.

Call Us for Expert Advice! 800-709-8210

The 2-stage frother can be used for all Jura models with Connector Systems©. This is a manual milk steam wand that attaches to some Jura coffee machines. To create fine foam for Cappuccinos, move the adjustable cylinder upward, place bullet tip nozzle in your milk container and turn on the steam. To steam milk for Lattes, move the adjustable cylinder downward while the bullet tip nozzle is submerged in the milk. If the frother is not cleaned after every use, milk deposits will harden and interrupt the steam flow needed to properly froth/steam. It is recommended you lubricate the internal O-Ring often to prevent it from hardening/cracking, which will prevent the frother from functioning properly. This stand-alone steam wand is not for newer Jura models.

 Spare Part for Older Jura Machines
   
   

Replacement Part for Jura Coffee Machine Models:


Jura Coffee Machine Line: Model:
Jura Capresso-Impressa C-Line: C5 - C9
Jura Capresso-Impressa E-Line: E8 - E9 - E10 - E25 - E75 - E80 - E85
Jura Capresso-Impressa F-Line: F5 - F7 - F8 - F9 - F50 - F70 - F90 - XF50 - XF70
Jura Capresso-Impressa F-Line: J5 - J6 - J7
Jura Capresso-Impressa S-Line: S7 - S7 AVG - S8 - S9 - S9 AVG - S50 - S85 - S90 - S95
Jura Capresso-Impressa X-Line: X90 - X95 - XS90 - XS95
Jura Capresso ENA Line: ENA 3 - ENA 4 - ENA 5 - ENA 7
Frothing Position: The sleeve of the frother is pushed down. Steaming Position: The sleeve is pushed up
© 2002–2024 1st in Coffee, LLC. All rights reserved.