Touch the
1-cup button once, twice or three times for mild, regular
or strong coffee. When the Jura Capresso Impressa F7 starts grinding, the display
shows the last cup size used in oz. At this time the left
rotary dial illuminates. Just turn the dial and change the
cup size from 1 oz. to 8 oz. It can't get any more
convenient.
Push the
2-cup button and the F7 will always produce twice as much
coffee as shown in the display. So, if the cup size is set
to 7 oz. the Jura F7 will brew a total of 14 oz. With the
height adjustable coffee spout any size cup will fit
easily underneath.
Two step
pre-infusion cycle moistens and conditions the ground
coffee. Maximum flavor extraction with perfect crema
topping.
The
Impressa F7 grinds from 5 to a maximum of 16 grams of
coffee from mild to extra strong.
Choose
from two temperature settings. Some like it hot, some
don't.
The
IJura F7 froths and steams milk in a pitcher or right
in your cup. Then without any delay, it grinds the beans
tamps and brews your coffee in less than 50 seconds...or
vice versa! No more work, no more guessing, no more messy
clean-up.
64 oz.
removable water container. Good for 40 espressos at a
time.
Integrated
professional solid steel conical burr grinder for
consistent and aroma-saving grinding. Six settings allow
you to adjust the fineness for all kinds of beans - from
light to dark roasts.
8 oz. bean
container. Grind up to 30 portions of coffee before
refilling.
Frother
can be used to release hot water for Cafe Americano or a
cup of tea. The hot water function is also programmable
from 1 to 16 oz.
New
CLEARYL Water Care System . Removes chlorine, lead,
aluminum and copper for a better tasting coffee. A special
organic additive removes almost all carbon and eliminates
decalcifying altogether.
Electronic
CLEARYL cartridge change indicator makes sure that you
always have the best water possible.
Separate
funnel for pre-ground coffee. Use for decaf or flavored
coffees. The moment you lift the lid of the funnel, the F7
knows that you want to use pre-ground coffee. It actually
asks you via the display to add ground coffee.
18-bar
power pump with 1450 watt stainless steel lined
ThermoBlock heating system. Fast continuous operation for
use at home or in the office.
13.6" High x 11" Wide x
17.1" Deep
Dual Frother
PLUS:
Push the
steam button. Within seconds, the ThermoBlock heating
system reaches steaming temperature. Immerse the Dual
Frother Plus into your milk pitcher or in your cup filled
with milk. When the display reads STEAM READY turn the
dial on the right side to the steam / hot water symbol.
Hot steam is released immediately. Steam output is
continuous. With the left rotary dial you can time the
steam output from 3 to 120 seconds. Or you can just stop
the steam output by turning the dial back to the cup
symbol. Need more steam? As long as the display reads
STEAM READY, you can steam away.
The Dual
Frother Plus is fast and easy to use. With two settings
for latte (steaming milk) and cappuccino (steaming and
frothing milk). Click on the video clip to see the frother
in action.
The
frother function can be set from 3 to 120 seconds. This
comes in handy when using the frothXpress Plus system
(sold separately). For more information on this system
watch the video clip entitled frothXpress Plus on this
page.
frothXpress PLUS System
(sold separately):
The
frothXpress PLUS system helps you to prepare perfect
cappuccinos and lattes cup after cup. It automatically
siphons milk from the cold milk container, combines it with
hot steam and delivers hot, frothed milk into your
Cappuccino cups. Turn the dial of the frothXpress plus to
the latte setting and the frothXpress plus will deliver hot
steamed milk with very little or no froth for that delicious
Latte.
Setting the
steam output to a certain time lets you fill cup after cup
with the exact same amount of hot steamed or frothed milk.
The result: always the same taste and no more wasted milk!
Fill as many
cups as you want then add your shot of espresso and serve
identical lattes or cappuccinos.
Temperature
control! For that extra hot Cappuccino or Latte move the
frothXpress Plus dial from the "-" settings towards the "+"
settings to increase the temperature of the milk.
Convenience,
Monitoring, Appearance and Safety Features:
10-digit LED
display dialog system. Gives you short, plain language
instructions: "Ready", "Heating" , "Steam Ready" , "Fill
Water", "Clean Unit" etc.
Illuminated
brewing area. Whenever you push a button, two LED lights
behind the coffee spout will illuminate your coffee. The
lights will turn off automatically if the machine is not
used for one minute.
Choose from
seven languages in the dialog system. English, Spanish,
French, German, Italian, Portuguese, and Dutch.
Select from
"Continuous-on" or "Auto-off" from 1/2 hour to 9 hours in
one hour increments. This makes sure the machine stays on as
long as you want.
"Auto-on."
The Jura F7 turns itself on at the programmed time and is ready
for your first cup.
Automatic
hot water rinse cycle when the Jura Capresso F7 is turned on and off.
Cleans and pre-heats all vital brewing parts.
Automatic
cleaning cycle indicator prevents coffee oil build-up in the
brew chamber. A short 15 minutes automated tablet cleaning
program with clear instructions in the LED display insures
clean inner parts and coffee that will never tastes oily or
rancid. No inner parts need to be removed. The display will
remind you automatically after approx. 200 cups of coffee.
Automatic
indicator when used coffee container is full. Used coffee
container holds up to 16 coffee portions.
Electronic
water level sensor will never let the machine operate
without water!
Check how
many cups of coffee you have made. Display can show total
number of cups brewed and number of cups for each coffee
button - and the ground coffee funnel (!).
Five level
water hardness selector. Set the machine to your water
hardness (comes with a water hardness indicator strip).
Video with
detailed tips on brewing, frothing methods and cleaning
included.
Compact
design with simple front panel controls. Fits underneath
kitchen cabinets.
Programming
The
Jura Capresso IMPRESSA F7
makes it easy to customize coffee settings to your liking. When the machine is
on and the display shows READY, push and hold the P-button until the
display shows FILTER. This indicates that you are in programming mode. Turn the
left rotary dial clockwise and the F7 will guide you through 11 programming
and look-up functions: FILTER, HARDNESS, AROMA, TEMPERATURE, TIME, AUTO-ON,
AUTO-OFF, STATS, LANGUAGE, ML / OZ. AND 24 HR AM/PM).
Once you select a function, just press the
button inside the dial and the display will show you the
options for this function. Dial the option you want and push
the button to confirm. Push the P-button to get back to making
coffee, indicated by READY in the display.