Jura Maintenance & Accessories
One of the great things about the Jura line of automatic coffee centers is how easy they are to maintain. Jura has designed the machines to be as easy to keep up as they are easy to use. This page will serve as an overview of the coffee machine repair procedures and Jura accessories, please refer to the instruction booklet for your particular model for detailed instructions for these cleaning and maintenance procedures.
Internal Cleaning
After each coffee is prepared, Jura machines dump the used grinds into a catch bucket. Periodically, the machine will indicate that it is time to "Empty Grinds". This is easily done by sliding the drip tray forward, exposing the catch bucket. Simply dump, rinse and replace.
Your Jura will also rinse water through the brew spouts at start up and shut down, from time to time you will need to remove the drip tray, dump the rinse water and replace the drip tray.
Less frequently, after about 200 cups, the machine will indicate it needs a tablet cleaning. This automatic cleaning cycle prevents coffee oil build-up in the brew chamber. A short 15 minutes automated tablet cleaning program with clear instructions in the LED display insures clean inner parts and coffee that will never tastes oily or rancid. No inner parts need to be removed. This cleaning program requires Jura Cleaning tablets, they are available in a Jar of 25 or in a 6 pack.
Water Filtration
All Jura coffee centers are designed to use water filters. These filters remove chlorine, lead, aluminum and copper from your tap water for a better tasting coffee. A special organic additive removes almost all carbon and eliminates the need for machine decalcifying altogether. Using these water filters is optional, but highly recommended. A water hardness test strip is included to allow you to set your water hardness level in that event that you decide not to use water filters (See decalcification below).
There are several different water filters, be sure to purchase the correct water filter for your machine. Jura has begun re-using model names, please check your instruction manual to confirm which filter your machine requires.
Clearyl Smart Water Filters utilize RFID technology allow certain Jura machines to automatically recognize when a filter is and installed and then to activate the filter.
For use in some of Jura's newest models: Z6, J6, E8 and E6.
Clearyl Blue Water Filters have a hexagonal connector on the bottom.
For models: All ENA models, C9, C60, C65, A1, A9, all Micro models, J9, J90, J80, GIGA 5, Z9
Clearyl White Water Filters:
Z5, old Z6, old E8, E9, J5, F60, F8 & old F7, C5 & S9 One Touch and the S7 & S9 Avantgarde only.
The following older models use the Claris Filter:
Claris Type One, Blue Wrapper: The original S7, S8 or S9, F9, C1000, C3000, E70, E75, S90, X90
Claris Type Two, Red Wrapper: Capresso models C1500 & C1300 and Bosch models B20 & B30
Decalcification
If you choose not to use water filters and you have properly set your water hardness level, your Jura machine will advise you when it is time to decalcify your machine. This Jura maintenance procedure eliminates calcium build up inside the machine preventing costly repairs. You will need Jura Decalcifier to eliminate this lime-scale build up in your machine.
Milk System Cleaner
Jura Milk System Cleaner. This cleaning agent is used to keep your machines milk frothing device sanitary and properly performing. Ideal for Impressa S9 One Touch and C9 One Touch and other Jura Capresso home super automatic espresso machines like the Giga 5, Z7, J9, Z5, Z6, S9, S8, S7 or espresso makers with frothXpress or cappuccinatore systems. Also works on steam wands. See your machines instructions for cleaning procedure. A convenient container for milk system cleaning is also available.
